Overview
The Honeywell integration allows you to receive the OOOI reports via CoPilot. Enabling this integration cuts down the amount of hand entering your pilots need to do on the flight logs.
Setup
** Start by sending an email to FSSAccounts@Honeywell.com letting them know you would like to enable the OOOI reports with BART**
Each aircraft must be enabled individually with BART.
- Open the aircraft you want to enable
- On the other tab, scroll to the Honeywell section
- Select the appropriate Datalink Unit from the dropdown
- Save the aircraft
- Repeat steps 1-4 for each aircraft you would like enabled
Send an email to FSSAccounts@Honeywell.com letting them know you would like to enable the OOOI reports with BART.
How it Works
Once the aircraft is setup and Honeywell has confirmed setup on their end, you will start receiving Honeywell OOOI reports within the individual flight logs in the CoPilot app. The reports could take up to 5 minutes to appear.
Pilots will be presented with a button to "Apply Honeywell Reports" which will apply the Honeywell OOOI to the OOOI of the report.
Data received from the OOOI report will vary based on the Datalink type.